Seen this cheaper elsewhere?
Call us on 03333 11 00 66
Speakers & Amplifiers | VISION AV-1800 | AV-1800 | ServersPlus

Illustration purposes only

VISION AV-1800

VISION Logo here

Manufacturer Part Code: AV-1800

Order Code: SPVIS-AV1800

Category: Speakers & Amplifiers

VISION STEREO DIGITAL AUDIO AMPLIFIER - 100w (rms @ 8 ohms) low impedance Bluetooth Input which can be renamed and have a pin setup 3 x stereo line-level inputs 1 x balanced microphone input (via XLR with phantom power). Post-mix line-level output. Featu

Details

The improved AV-1800 is compact, and has a simple interface with just two dials which are turned to adjust and pushed to switch. It has a selection of inputs – including Bluetooth and a microphone input, making it suitable for meeting rooms, small auditoriums, lecture theatres, school halls, and small churches.

Bluetooth

The amplifier can automatically switch to the Bluetooth source when it is paired. Bluetooth can be renamed and the pin changed by connecting to a PC (see software link below)

Microphone Input

It uses a professional XLR connector and the input is ?balanced? to eliminate electro-magnetic noise induced on long cables. The microphone input has ?Phantom Power? – a voltage which is required by condenser-type microphones such as lectern microphones.

RS-232

It can be controlled by a control device such as Techconnect Control via IR or RS-232. It also comes with an IR remote control gives the user bass and treble adjustment and direct input selection.

3 x Stereo Inputs

Three stereo inputs accept input from a variety of sources such as computers (via the headphone jack), tablets or phones. 2 of the inputs are via 2-phono (RCA) connectors on the rear panel. Input 3 is via a 3.5mm Minijack connector, and is duplicated on the front and rear panels for easy access.

Line Output

A line-level pre-output on the rear panel bypasses the internal amplifier. It would connect to a larger amplifier or powered loudspeakers. It is post-mix, which means any volume adjustment made on the front panel affects the output level.

Auto-Standby

If the amplifier senses no input it will automatically go into standby mode. When it senses input it will reactivate. Auto-standby can be disabled.

Mounting Options

Optional mounting hardware is included to allow cable-tying either to a projector ceiling pole, or into a rack.

Technical Information

Signal-to-Noise Ratio (SNR)
75 dB
RMS rated power
100 W
Total Harmonic Distortion (THD)
1%
Input impedance
47000 O
Frequency range
20 - 20000 Hz
Amplifier class
D
Certification
WEEE, CE/EMC, CE/LVD, C-TICK, FCC
RoHS compliance
Y
Power consumption (typical)
125 W
AC input voltage
100-240
Operating temperature (T-T)
0 - 40 °C
Batteries included
Y
Package dimensions (WxDxH)
415 x 230 x 80 mm
Package weight
2.4 kg
XLR in
Y
Speakers connectivity type
3.5mm
Phono audio in (L,R)
Y
Connectivity technology
Wired & Wireless
Handheld remote control
Y
Colour of product
White
Cables included
AC, Audio (3.5mm)
Purpose
Home
Maximum input level
0.9 V
Weight
2 kg
Height
64 mm
Width
236 mm
Depth
215 mm

Customers Also Viewed:

#