Seen this cheaper elsewhere?
Call us on 03333 11 00 66
Speakers & Amplifiers | VISION SB-800P Black Active Soundbar | SB-800P | ServersPlus

Illustration purposes only

VISION SB-800P Black Active Soundbar

VISION Logo here

Manufacturer Part Code: SB-800P

Order Code: SPVIS-SB800P

Category: Speakers & Amplifiers

VISION BLACK ACTIVE SOUNDBAR - 12w (rms) each 2 x stereo line-level inputs (1 x Minijack / 1 x 2-Phono) brackets included for mounting to wall or for hanging under flat-panel VESA mount. Plastic chassis. 4-way 4 x 2.5 drivers. Dimensions: 900 wide ? 99 ta

- Built-in 2 x 15 watt (RMS) amplifier
- Line-level inputs or speaker-level inputs
- Wall brackets and flat-panel brackets included

Vision's SB-800P Soundbar is a simple way to add quality audio to professional flat-panel screens which do not have speakers integrated. The attractive chassis enhances any audio-visual installation in meeting rooms, boardrooms, and conference rooms.

Mobile Audio
If users need to be able to move their interactive flat panel screen between rooms Vision's soundbar is the perfect choice. The soundbar can be hung under the flat panel, attaching to the flat panel floor mount at the same points the flat panel uses.

4-Way
Two 3.5? woofers are complemented by two tweeters. A crossover circuit splits the frequency spectrum across four drivers to maximise efficiency.

Volume Control
The volume dial is positioned underneath the loudspeaker. Turning anti-clockwise turns power off. Note: no remote control is included.

Wall Bracket
If the flat-panel is wall mounted then a wall bracket is included which fixes the soundbar close to the wall.

Hanging Brackets
A set of 700 mm (27.6?) brackets is also included which hang the soundbar under the flat panel.

Speaker-Level Input
As well as being able to connect any line-level device to the SB-800P – like your phone – you can also opt to bypass the internal amplifier and use the soundbar as passive speakers. Some flat panels have an amplifier inside, so this approach allows you to use the flat-panel remote to adjust volume.

ABS Chassis
Heavy-weight plastic material is used for the chassis, allowing a beautiful curved chassis and a rigid acoustic chamber for low-distortion sound.

Two Summed Line-level Inputs
The input panel offers minijack and 2-phono (RCA) line-level inputs which are combined at the input stage meaning there is no input selection switch. When both inputs are used it is especially important that all source and display devices in the system are powered from the same mains power source, otherwise earth hums will occur.

Technical Information

RMS rated power
30 W
Audio output channels
2.0 channels
Certification
RoHS, WEEE, CE/EMC, FCC, RCM-POC, RCM-SDOC
AC input frequency
50/60
AC input voltage
100-240
Mounting brackets included
Y
Package weight
2.7 kg
Line-in
Y
Connectivity technology
Wired
Headphone outputs
1
DC-in jack
Y
Impedance
8 O
Woofer diameter (imperial)
8.89 cm (3.5")
Tweeter diameter
1.52 cm (0.6")
Number of woofer drivers
2
Number of tweeter drivers
2
Soundbar speaker RMS power
30 W
Dimensions (WxDxH)
756 x 75 x 99 mm
Weight
2 kg
Wall mountable
Y
Quantity
1
Colour of product
Black
Width (imperial)
75.7 cm (29.8")
Height (imperial)
9.91 cm (3.9")
Depth (imperial)
7.37 cm (2.9")
Frequency range
120 - 20000 Hz
Package weight
2.7 kg
Package weight
2.7 kg
Height
99 mm
Width
756 mm
Depth
75 mm
Package depth
92 mm
Package width
870 mm
Soundbar weight
2 kg

Customers Also Viewed:

#