Call us on 03333 11 00 66
Manufacturer Part Code: AV-1800+CS-1800
Order Code: SPVIS-AV1800CS18
Category: Speakers & Amplifiers
VISION DIGITAL AMPLIFIER BUNDLED WITH A PAIR OF WHITE CEILING SPEAKERS - Amplifier Specifications: 2x50w (RMS @ 8 ohms) 1 x Bluetooth input 3 x stereo inputs 1 x XLR mic input. Includes: 4 x Figure-8 power cable 1.8m (UK/EU/US/AU) 3.5mm minijack to minij
The CS-1800 ceiling speakers feature a two-way design. They use the ceiling void as an infinite baffle – allowing un-damped driver excursion – all of which adds up to rich, detailed sound. The main driver is a 6.5? polypropylene cone complimented by an advanced 0.5? tweeter. These low impedance speakers do not sacrifice frequency range like 100/70v line speakers do.
The grille clips into place magnetically once the speakers are secured.
The grille extends all the way to the edge of the speaker resulting in virtually no visible edge. This sleek new style allows the technology to visually disappear.
Simple to fit
A cutout template is included so the installer can easily trace the cut line in the ceiling tile. Cut a 198 mm (7.8?) hole and fit the speaker; it's quick and easy.
Only 82 mm (3.2?) deep, the CS-1800 can be placed optimally around the room. They fit in any environment which has a false ceiling.
A high quality crossover circuit is included to split the work between the woofer and tweeter.
Ceiling speakers often lack the power of wall speakers, but the CS-1800 has a higher sensitivity of 90dB to cut through high-noise presentation environments.
The improved AV-1800 is compact, and has a simple interface with just two dials which are turned to adjust and pushed to switch. It has a selection of inputs – including Bluetooth and a microphone input, making it suitable for meeting rooms, small auditoriums, lecture theatres, school halls, and small churches.
The amplifier can automatically switch to the Bluetooth source when it is paired. Bluetooth can be renamed and the pin changed by connecting to a PC (see software link below)
It uses a professional XLR connector and the input is ?balanced? to eliminate electro-magnetic noise induced on long cables. The microphone input has ?Phantom Power? – a voltage which is required by condenser-type microphones such as lectern microphones.
It can be controlled by a control device such as Techconnect Control via IR or RS-232. It also comes with an IR remote control gives the user bass and treble adjustment and direct input selection.
3 x Stereo Inputs
Three stereo inputs accept input from a variety of sources such as computers (via the headphone jack), tablets or phones. 2 of the inputs are via 2-phono (RCA) connectors on the rear panel. Input 3 is via a 3.5mm Minijack connector, and is duplicated on the front and rear panels for easy access.
A line-level pre-output on the rear panel bypasses the internal amplifier. It would connect to a larger amplifier or powered loudspeakers. It is post-mix, which means any volume adjustment made on the front panel affects the output level.
If the amplifier senses no input it will automatically go into standby mode. When it senses input it will reactivate. Auto-standby can be disabled.
Optional mounting hardware is included to allow cable-tying either to a projector ceiling pole, or into a rack.