Call us on 03333 11 00 66
Manufacturer Part Code: CS-1800P
Order Code: SPVIS-CS1800P
Category: Speakers & Amplifiers
VISION PAIR OF WHITE ACTIVE CEILING SPEAKERS - 30w (rms) each 1 x stereo line-level input (via 2-phono) 1 x stereo line-level output (via minijack to loop to second set) 1 x Bluetooth 4.0 input IR remote control Low-impedance 2-way: 6.5 polypropylene woof
The CS-1800P are based on Vision's passive ceiling loudspeakers but have a powerful 60 watt amplifier built in to eliminate the need for an external amplifier. They are suited to meeting rooms and classrooms where a discrete audio solution is required.
Bluetooth 4.0 LTE
Connect directly from your phone or laptop wirelessly. Note: implementation of Bluetooth drivers on Windows computers is variable so they don't always work
For environments where multiple pairs are used in close proximity the Bluetooth name of each set can be modified from an Android phone.
You can choose to automatically change to the Bluetooth input when a device is paired, or manually switch when you are ready.
A full range of options are presented on the IR remote control, including bass and treble adjustment.
IR Front and Rear
Switch between the front IR receiver, or the rear IR receiver (if using a wired control system), or off.
Like Vision's other powered loudspeakers these are packaged and sold as a pair. The amplifier is housed in the ?master? loudspeaker which has the connection panel, and there is a speaker output which connects to the passive ?slave? loudspeaker.
If you require two pairs for the room an audio output allows you to pass the audio signal on to a second pair of CS-1800P. In fact you can daisy-chain as many pairs as you need using this line-level audio output.
To assist with integration into a fully controlled audio-visual environment these loudspeakers can be controlled with RS-232 (serial) codes.
When power is connected the CS-1800P automatically turns on and remembers the previous input and volume setting. Restoring power brings the loudspeakers back to life automatically.
These loudspeakers feature a two-way woofer and tweeter design which sounds great in presentation or teaching environments.
If the amplifier senses no input it will automatically go into standby mode. As soon as you press play on your source device it will automatically switch on again. This automatic feature can be disabled with the remote control.
The bezel-less grille clips into place magnetically once the speakers are secured.
Simple to fit
A cutout template is included so the installer can easily trace the cut line in the ceiling tile. Cut a 198 mm (7.8?) hole and fit the speaker; it's quick and easy.
Only 95 mm (3.74?) deep, the CS-1800P can be placed optimally around the room. They fit in any environment which has a false ceiling.
A high quality crossover circuit is included to split the work between the woofer and tweeter.