Call us on 03333 11 00 66
VISION SB-800P Black Active Soundbar
Manufacturer Part Code: SB-800P
Order Code: SPVIS-SB800P
Category: Speakers & Amplifiers
VISION BLACK ACTIVE SOUNDBAR - 12w (rms) each 2 x stereo line-level inputs (1 x Minijack / 1 x 2-Phono) brackets included for mounting to wall or for hanging under flat-panel VESA mount. Plastic chassis. 4-way 4 x 2.5 drivers. Dimensions: 900 wide ? 99 ta
- Built-in 2 x 15 watt (RMS) amplifier
- Line-level inputs or speaker-level inputs
- Wall brackets and flat-panel brackets included
Vision's SB-800P Soundbar is a simple way to add quality audio to professional flat-panel screens which do not have speakers integrated. The attractive chassis enhances any audio-visual installation in meeting rooms, boardrooms, and conference rooms.
If users need to be able to move their interactive flat panel screen between rooms Vision's soundbar is the perfect choice. The soundbar can be hung under the flat panel, attaching to the flat panel floor mount at the same points the flat panel uses.
Two 3.5? woofers are complemented by two tweeters. A crossover circuit splits the frequency spectrum across four drivers to maximise efficiency.
The volume dial is positioned underneath the loudspeaker. Turning anti-clockwise turns power off. Note: no remote control is included.
If the flat-panel is wall mounted then a wall bracket is included which fixes the soundbar close to the wall.
A set of 700 mm (27.6?) brackets is also included which hang the soundbar under the flat panel.
As well as being able to connect any line-level device to the SB-800P – like your phone – you can also opt to bypass the internal amplifier and use the soundbar as passive speakers. Some flat panels have an amplifier inside, so this approach allows you to use the flat-panel remote to adjust volume.
Heavy-weight plastic material is used for the chassis, allowing a beautiful curved chassis and a rigid acoustic chamber for low-distortion sound.
Two Summed Line-level Inputs
The input panel offers minijack and 2-phono (RCA) line-level inputs which are combined at the input stage meaning there is no input selection switch. When both inputs are used it is especially important that all source and display devices in the system are powered from the same mains power source, otherwise earth hums will occur.