Seen this cheaper elsewhere?
Call us on 03333 11 00 66
Unmanaged Switches | NETGEAR FS116PEU | FS116PEU | ServersPlus
L R
NETGEAR FS116PEU | serversplus.comNETGEAR FS116PEU | serversplus.comNETGEAR FS116PEU | serversplus.comNETGEAR FS116PEU | serversplus.com

Illustration purposes only

NETGEAR FS116PEU

NETGEAR Logo here

Manufacturer Part Code: FS116PEU

Order Code: NPNET-FS116P

Category: Unmanaged Switches

FS116P - ProSafe™ 16 Port Switch (with 8 Power x Power over Ethernet (PoE) Ports)

Key Features:

  • Data switching & Power-over-Ethernet (PoE) in one unit

  • 16 data switching ports, 8 of which provide PoE

  • Reduces cables & eliminates need for dedicated electrical outlets

  • Locate wireless devices high on walls or ceilings for max coverage

  • AutoUplink™ auto detects speed, duplex & cable type

  • Automatically detects PoE devices & supplies power as needed

  • Compact & Flexible design at an attractive price


  • More Information

    Connectivity with PoE
    NETGEAR's FS116P ?Power over Ethernet' (PoE) enabled switch provides 16 x 10/00 Fast Ethernet ports for data communications. 8 of these ports can also provide PoE, the IEEE 802.3af industry standard to deliver power as well as data over the same Ethernet cable. Power over Ethernet greatly simplifies the positioning and installation of wireless and IP devices, such as wireless access points, IP-based CCTV cameras and VoIP phones. PoE eliminates the need to position dedicated electrical sockets near each and every mobile wireless device, lowering installation costs. The FS116P PoE switch enables network administrators to position their IP and wireless devices anywhere they choose, i.e. high up on ceilings or walls, even where AC power would have difficult to access and expensive to install.

    An advanced auto-sensing algorithm provides power only to 802.3af end devices, so there is no need to be concerned about damaging non-PoE equipment. In addition, as with all of NETGEAR's power over Ethernet switches, the FS116P discontinues the power when PoE devices are disconnected. Easy to set-up and reliable, the ProSafe FS116P unmanaged Power over Ethernet switch automatically determines PoE requirements, speed, duplex and cable type of each connection using Auto Uplink™ technology.

    Value for Money
    With data network switching and Power over Ethernet integrated into a single casing, the FS116P unmanaged switch saves space, reduces cabling costs and eliminates the need for dedicated electrical outlets for wireless and IP devices. All this minimises disruption in the office and lowers installation costs by eliminating the need for electricians and extension reels.


    Business IT purchase over £1000? Spread the cost on a monthly basis with our flexible leasing options.

    Technical Information

    Safety
    CE; CE/LVD EN60950
    Electromagnetic emissions
    CE mark, commercial, FCC Part 15 Class A, VCCI Class A, EN 55022 (CISPR 22) Class A, C-Tick
    Latency
    20 µs for 64-byte frames
    MAC address table
    1000 entries
    Switching capacity
    3.2 Gbit/s
    Maximum data transfer rate
    0.1 Gbit/s
    10G support
    N
    Safety
    CE; CE/LVD EN60950
    LED indicators
    Activity, Speed
    LED indicators
    System: Power, PoE Maximum Power; Per Port: Link, Activity, Speed, PoE Active, PoE Status
    Source data-sheet
    Power consumption (typical)
    80 W
    Power over Ethernet (PoE) Support
    Y
    LED indicators
    Activity, Speed
    LED indicators
    System: Power, PoE Maximum Power; Per Port: Link, Activity, Speed, PoE Active, PoE Status
    Drive device, buffer size
    0.096 MB
    Packet buffer memory
    0.096 MB
    MAC address table
    1000 entries
    Networking standards
    IEEE 802.3af,IEEE 802.3i,IEEE 802.3u,IEEE 802.3x
    10G support
    N
    Storage temperature range (T-T)
    10 - 70 °C
    Operating temperature range (T-T)
    0 - 40 °C
    Storage relative humidity range
    95
    Dimensions (WxDxH)
    287 x 103 x 27 mm
    Latency
    20 µs for 64-byte frames
    Power requirements
    48VDC, 4.5 power output
    Electromagnetic emissions
    CE mark, commercial, FCC Part 15 Class A, VCCI Class A, EN 55022 (CISPR 22) Class A, C-Tick
    Data transfer rate
    100 Mbit/s
    Mean time between failures (MTBF)
    116009 h
    Packet buffer memory
    0.096 MB
    Ports quantity
    16
    Copper ethernet cabling technology
    100BASE-TX,10BASE-T
    Power over Ethernet (PoE) ports quantity
    8
    Basic switching RJ-45 Ethernet ports type
    Fast Ethernet (10/100)
    Basic switching RJ-45 Ethernet ports quantity
    16
    Power over Ethernet (PoE) support
    Y
    Power over Ethernet (PoE) ports quantity
    8
    Data link protocols
    Ethernet, Fast Ethernet
    Mean time between failures (MTBF)
    116009 h
    Source data-sheet
    Weight
    828 g
    Weight
    840 g
    Height
    27 mm
    Width
    286 mm
    Depth
    102 mm

    Customers Also Viewed:

    #