Seen this cheaper elsewhere?
Call us on 03333 11 00 66
PC Enclosures & Brackets | STARTECH StarTech USB 3.0 SATA Hard Drive Duplicator & Eraser Dock - Standalone 2.5/3.5in HDD & SSD Eraser an | SATDOCK2REU3 | ServersPlus

Illustration purposes only

STARTECH StarTech USB 3.0 SATA Hard Drive Duplicator & Eraser Dock - Standalone 2.5/3.5in HDD & SSD Eraser an

STARTECH Logo here

Manufacturer Part Code: SATDOCK2REU3


Category: PC Enclosures & Brackets

StarTech USB 3.0 SATA Hard Drive Duplicator & Eraser Dock - Standalone 2.5/3.5in HDD & SSD Eraser and Cloner

Clone a 2.5in/3.5in SATA drive without a host computer connection, or dock the drives over USB 3.0 for easy access

- Supports 2.5in and 3.5in form factor SATA hard drives (HDD) and solid state drives (SSD)
- Standalone Sector-by-Sector hard drive duplication
- Stand alone single pass overwrite erase
- SuperSpeed USB 3.0 compliant host interface, with up to 5 Gbps of data bandwidth
- High Speed USB 2.0 compliant host interface, with transfer rates up to 480Mbps
- Supports SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives
- Plug-and-Play and Hot-Swap compatible
- Universal Power Adapter (NA/UK/EU)
- Built-in LED progress bar

- System administrators who need quick access to drives for imaging
- Data Archiving
- Technicians who regularly test or benchmark different hard drives and need to swap between them
- Forensic investigators who require disk sector imaging/cloning to create an exact replica of a source drive onto a different drive
- Professionals who require identical backups for when data integrity is crucial, such as data recovery
- Cloning hard drives that contain hidden partitions, that some software disk cloning programs may skip
- IT administrators that wish to quickly clear/erase a drive in preparation for use in other applications
- Data recovery specialists who need quick access to drives to recover/retrieve data

The SATDOCK2REU3 USB 3.0 Standalone Duplicator and Eraser Dock lets you connect your 2.5in/3.5in SATA HDDs or SSDs through SuperSpeed USB 3.0, with the ability to swap drives in and out as needed. The dock also functions as a standalone drive duplicator and eraser – an efficient and versatile solution for external drive management.

Featuring standalone Sector by Sector hard drive duplication with built-in LED progress bar, and support for 2 drive single pass over writing the SATDOCK22EU3 is a user-friendly all-in-one solution for any application requiring hard drive duplication or erasing.

With support for SATA I/II/III, and large capacity drives (tested up to 4TB) this HDD/SSD docking station is compatible with virtually any SATA hard drive, and greatly increases the storage/backup capabilities of your computer.

Extend the value of this hard drive docking station further with the addition of our SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in. IDE hard drive into a SATA hard drive dock.

The SATDOCK2REU3 is backed by a 2-year warranty and free lifetime technical support.

The Advantage
- Quickly copy hard drives, with standalone sector by sector HDD/SSD duplication
- Securely erase up to two drives simultaneously, with Single Pass HDD overwriting
- Hassle-free access to drive data, with hot-swappable top slot-loading dock design that supports both 2.5in and 3.5in HDD/SSDs

Warranty Information
Warranty: 2 Years

Chipset ID: Prolific - PL2775
Compatible Drive Types: SATA
Drive Installation: Removable
Drive Size: 2.5in & 3.5in
Fan(s): No
Interface: USB 3.0
Number of Drives: 2

Max Drive Capacity: Currently tested with up to 4TB 7200 RPM 3.5" hard drives and 1TB 7200 RPM 2.5" hard drives
Type and Rate:
- USB 3.0 - 5 Gbit/s
- SATA II (3 Gbps)

Drive Connectors: 2 - SATA Data & Power Combo (7+15 pin)
Host Connectors: 1 - USB Type-B (9 pin) USB 3.0

OS Compatibility: OS independent; No software or drivers required

Special Notes / Requirements,/b>
Note: Destination drive must be the same size or larger than the source drive

LED Indicators:
1 - HDD1 / 75%
1 - HDD2 / 100%
1 - Link / 25%
1 - Power / 50%

Center Tip Polarity: Positive
Input Current: 1.2A
Input Voltage: 110V-240V AC
Output Current: 3000mA
Output Voltage: 12 DC
Plug Type: M
Power Consumption (In Watts): 36
Power Source: AC Adapter Included

Humidity: 5-90%
Operating Temperature: 0°C to 85°C (32°F to 185°F)
Storage Temperature: -10°C to 95°C (14°F to 203°F)

Physical Characteristics
Product Height: 62 mm [2.4 in]
Product Length: 128 mm [5 in]
Product Weight: 610 g [21.5 oz]
Product Width: 103 mm [4.1 in]

Packaging Information
Shipping (Package) Weight: 710 g [25.1 oz]

What's in the Box
Included in Package:
1 - HDD Dock
1 - USB 3.0 Cable
1 - Universal power adapter: comes ready for NA/EU/UK only when you buy in NA/EU/UK; comes ready for Australia and New Zealand only when you buy in Australia and New Zealand
1 - User Manual

Technical Information

Maximum storage capacity
4 TB
Storage media type
Storage drive interface
Serial ATA, Serial ATA II, Serial ATA III
Number of storage drives supported
Storage drive sizes supported
LED indicators
HDD, Link, Power
Windows operating systems supported
Windows 7 Home Basic,Windows 8,Windows XP Home
Mac operating systems supported
Linux operating systems supported
Operating relative humidity (H-H)
5 - 90%
Storage temperature (T-T)
-10 - 95 °C
Operating temperature (T-T)
0 - 85 °C
Standard interfaces
USB 3.0
AC adapter included
Cables included
Package weight
700 g
Package height
62 mm
Package width
120 mm
USB 3.0 ports quantity
Output voltage
Input current
Output current
4 A
AC input voltage
Colour of product
Maximum data transfer rate
5 Gbit/s
Standard interfaces
USB 3.0
562 g
62 mm
103 mm
128 mm