Seen this cheaper elsewhere?
Call us on 03333 11 00 66
Fujitsu Raid Controllers | FUJITSU RAID Controller Flash Backup Unit Option with 25cm 55cm 75cm Cable | S26361-F5243-L110 | ServersPlus
FUJITSU S26361-F5243-L110 | serversplus.com

Illustration purposes only

FUJITSU RAID Controller Flash Backup Unit Option with 25cm 55cm 75cm Cable

FUJITSU Logo here

Manufacturer Part Code: S26361-F5243-L110

Order Code: COFUJ-S26361F521

Category: Fujitsu Raid Controllers

Fujitsu RAID Controller Flash Backup Unit Option with 25cm 55cm 75cm Cable

The RAID concept (Redundant Array of Independent Disks) refers to several independent hard disks which form a large logical drive when switched together. Redundancy information is calculated from several data blocks (except for RAID 0) and saved distributed to the individual hard disks. Your operating system no longer accesses the individual hard disks, but the array.
The actual objective of the RAID concept is to increase availability and prevent downtimes in the event of a hard disk failure. However, the theoretical security of the RAID concept is only as good as the RAID controller used. Benefit from the Fujitsu RAID controllers where technology, experience and practical implementation all ensure the security that your company needs in the event of an emergency.

Technical Information

Data transfer rate
12 Gbit/s
RAID levels
0, 1, 5, 6, 10, 50, 60
Data transfer rate
12 Gbit/s
S.M.A.R.T support
Y
SSD support
Y
Host interface
PCI
Supported hard disk drive interfaces
SAS, SATA
PCI Express slots version
3.0
Supported storage drive interfaces
SAS, Serial ATA
RAID levels
0, 1, 5, 6, 10, 50, 60
S.M.A.R.T support
Y
SSD support
Y

#