Seen this cheaper elsewhere?
Call us on 03333 11 00 66
Fujitsu Raid Controllers | FUJITSU PRAID EP420i S26361-F5243-L200 | S26361-F5243-L200 | ServersPlus
FUJITSU S26361-F5243-L200 | serversplus.com

Illustration purposes only

FUJITSU PRAID EP420i S26361-F5243-L200

FUJITSU Logo here

Manufacturer Part Code: S26361-F5243-L200

Order Code: COFUJ-S26361F524

Category: Fujitsu Raid Controllers

PRAID EP420i

The RAID concept (Redundant Array of Independent Disks) refers to several independent hard disks
which form a large logical drive when switched together.
Redundancy information is calculated from several data blocks (except for RAID 0) and saved
distributed to the individual hard disks. Your operating system no longer accesses the individual
hard disks, but the array. The actual objective of the RAID concept is to increase availability and prevent downtimes in the event of a hard disk failure. However, the theoretical security of the RAID concept is only as good as the RAID controller used. Benefit from the Fujitsu RAID controllers where technology, experience and practical implementation all ensure the security that your company needs in the event of an emergency.

Technical Information

Data transfer rate
12 Gbit/s
Internal memory
1024 MB
Internal memory
1024 MB
Chipset
LSI SAS3108
RAID levels
0, 50, 1, 6, 60, 5, 10
Data transfer rate
12 Gbit/s
S.M.A.R.T support
Y
SSD support
N
RAID Level Migration
Y
Online Capacity Expansion
Y
Host interface
PCI Express x8
PCI Card form factor
full-height (low-profile)
Supported storage drive interfaces
SAS
Chipset
LSI SAS3108
RAID levels
0, 50, 1, 6, 60, 5, 10
S.M.A.R.T support
Y
SSD support
N
RAID Level Migration
Y
Online Capacity Expansion
Y

Customers Also Viewed:

#