Seen this cheaper elsewhere?
Call us on 03333 11 00 66
Aruba Managed Network Switches | ARUBA 2530-48 Network Switch | J9781A | ServersPlus

Illustration purposes only

ARUBA 2530-48 Network Switch

ARUBA Logo here

Manufacturer Part Code: J9781A

Order Code: NPHEW-J9781A

Category: Aruba Managed Network Switches

2530-48 Switch Managed 48 x RJ45 autosensing 10/100 ports 2 x SFP 1000 ports 2 x RJ45 10/100/1000 ports Lifetime Warranty

Overview
The HP 2530 Switch Series consists of 12 fully managed Layer 2 edge switches that deliver cost-effective, reliable, secure, and easy-to-use connectivity to business networks. Designed for entry-level to midsize enterprise networks, these Gigabit and Fast Ethernet switches deliver full Layer 2 capabilities with optional PoE+, enhanced access security, traffic prioritization, and IPv6 host support. The HP 2530 Switch Series offers uplink flexibility with four Gigabit Ethernet uplinks on all 24- and 48-port models. Gigabit Ethernet uplinks are four small form-factor pluggable (SFP) slots for fiber connectivity on the 24- and 48-port Gigabit Ethernet models. The Fast Ethernet 24- and 48-port models have two SFPs and two RJ-45 Gigabit uplinks. The compact and fanless 8-port switches offer additional flexibility with two dual-personality ports that can be used as either RJ-45 Gigabit Ethernet or SFP ports. For customers implementing Power over Ethernet for voice, video, or wireless deployments, the HP 2530 PoE+ switches are IEEE 802.3af and IEEE 802.3at compliant with up to 30 W per port. The switch series is easy to use, deploy, and manage via SNMP, CLI, and Web GUI. It offers flexible wall, table, and rack mounting; quiet operation with fanless and variable speed fan models; and improved power savings, with features such as IEEE 802.3 az (Energy Efficient Ethernet). These switches include a lifetime warranty, as well as all software releases and technical phone support.

Features
Quality of Service (QoS)

• Traffic prioritization (IEEE 802.1p): allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP)


Management

• Choice of management interfaces: Web graphical user interface (GUI): HTML-based easy-to-use graphical interface allows configuration of the switch from any Web browser. Command-line interface (CLI): provides advanced configuration and diagnostics through a robust CLI. Simple Network Management Protocol (SNMPv1/v2c/v3): allows a switch to be managed with a variety of third-party network management applications.


Connectivity

• IPv6: IPv6 host: allows the switch to be deployed and managed at the edge of an IPv6 network. Dual stack (IPv4/IPv6): supports connectivity for both protocols; provides a transition mechanism from IPv4 to IPv6. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network.


Layer 2 switching

• VLANs: provides support for 512 VLANs and 4,094 VLAN IDs


Security

• Access control lists (ACLs): accommodates IPv4/IPv6 port and VLAN-based ACLs (IPv6 ACL is supported only on Gigabit Ethernet and 48-port models)


Convergence

• LLDP-MED (Media Endpoint Discovery): defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones


Resiliency and high availability

• Port trunking and link aggregation: Trunking: supports up to eight links per trunk to increase bandwidth and create redundant connections; supports L2, L3, and L4 trunk load-balancing algorithm (L4 trunk load balancing is supported only on Gigabit Ethernet and 48-port models). IEEE 802.3ad Link Aggregation Protocol (LACP): eases configuration of trunks through automatic configuration.


Business IT purchase over £1000? Spread the cost on a monthly basis with our flexible leasing options.

Technical Information

Safety
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1
Electromagnetic compatibility
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Latency
100 Mb Latency: < 6.6 µs; 1000 Mb Latency: < 2.2 µs
MAC address table
16000 entries
Switching capacity
17.6 Gbit/s
Latency (10-100 Mbps)
6.6 µs
Latency (1 Gbps)
2.2 µs
Throughput
13 Mpps
Safety
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1
Electromagnetic compatibility
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Form factor
Rack (1U)
Colour of product
Grey
Stackable
Y
Source data-sheet
Power consumption (typical)
29.9W
Input voltage
100 - 127 / 200 - 240 VAC
Heat dissipation
102 BTU/h
Power over Ethernet (PoE) Support
382 W; Maximum, depending on model
Input current
0.7/0.4 A
AC input frequency
50/60
AC input voltage
100-240
Power supply included
Y
Switch layer
L2
Switch type
Managed
MAC address table
16000 entries
Networking standards
IEEE 802.3
Operating altitude
3 km
Operating relative humidity range
15 to 95 @ 104°F
Storage temperature range (T-T)
-40 - 70 °C
Operating temperature range (T-T)
0 - 45 °C
Storage relative humidity range
15 to 90 @ 149°F
Heat dissipation
102 BTU/h
Operating temperature range (T-T)
32 - 113 °F
Dimensions (WxDxH)
442 x 246.4 x 44.5 mm
Electromagnetic immunity
EN 55024, CISPR 24; EN 55024, CISPR 24; IEC 61000-4-2; IEC 61000-4-3; IEC 61000-4-4; IEC 61000-4-5; IEC 61000-4-6; IEC 61000-4-8; IEC 61000-4-11; EN 61000-3-2, IEC 61000-3-2; EN 61000-3-3, IEC 61000-3-3
I/O ports
48 RJ-45 autosensing 10/100 ports; 2 autosensing 10/100/1000 ports; 2 fixed Gigabit Ethernet SFP ports; Included
Latency
100 Mb Latency: < 6.6 µs; 1000 Mb Latency: < 2.2 µs
Acoustic pressure emissions
Power: 0, Pressure: 0 dB
Management platform
IMC - Intelligent Management Center; command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C or Micro USB); IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB
Memory and processor
ARM9E @ 800 MHz; 128 MB flash; packet buffer size: 3 MB dynamically allocated; 256 MB DDR3 DIMM
Size
44.2 cm (17.4")
Input voltage
100 - 127 / 200 - 240 VAC
Mounting
Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); horizontal surface mounting; wall mounting
Input frequency
50 - 60 Hz
Weight
2.86 kg (6.3 lb)
Operating altitude (imperial)
up to 10000 ft
Stackable
Y
I/O ports
48 RJ-45 autosensing 10/100 ports; 2 autosensing 10/100/1000 ports; 2 fixed Gigabit Ethernet SFP ports; Included
SFP ports quantity
2
Basic switching RJ-45 Ethernet ports type
Fast Ethernet (10/100)
Basic switching RJ-45 Ethernet ports quantity
50
SFP module slots quantity
2
Power over Ethernet (PoE) support
382 W; Maximum, depending on model
Acoustic pressure emissions
Power: 0, Pressure: 0 dB
Electromagnetic immunity
EN 55024, CISPR 24; EN 55024, CISPR 24; IEC 61000-4-2; IEC 61000-4-3; IEC 61000-4-4; IEC 61000-4-5; IEC 61000-4-6; IEC 61000-4-8; IEC 61000-4-11; EN 61000-3-2, IEC 61000-3-2; EN 61000-3-3, IEC 61000-3-3
Form factor
Rack (1U)
Colour of product
Grey
Stackable
Y
Operating altitude (imperial)
up to 10000 ft
Source data-sheet
Weight
2.86 kg
Height
44.5 mm
Width
442 mm
Depth
246.4 mm
Weight
2.86 kg (6.3 lb)

Customers Also Viewed:

#