Seen this cheaper elsewhere?
Call us on 03333 11 00 66
HPE Managed Network Switches | HPE FlexNetwork 5130 48G POE+ 2SFP+ 2XGT (370W) EI | JG941A | ServersPlus

Illustration purposes only

HPE FlexNetwork 5130 48G POE+ 2SFP+ 2XGT (370W) EI

HPE Logo here

Manufacturer Part Code: JG941A

Order Code: NPHEW-JG941A

Category: HPE Managed Network Switches

5130 EI Switch Series

The HPE 5130 EI Switch Series delivers flexibility, scalability and low TCO at the access layer of medium and large enterprise campus networks. The series offers enterprise class QoS and security, Hewlett Packard Enterprise Intelligent Resilient Fabric (IRF) stacking, static layer 3 routing and RIP, convenient fixed 10GbE uplink ports, PoE+, ACLs, IPv6 and delivers energy savings with Energy Efficient Ethernet.

The 5130 EI Switch Series can be managed with HPE Intelligent Management Center (IMC) for a single view of your entire network.

Features

Scalable and Flexible Access Layer Switches
- The HPE 5130 EI Switch Series delivers flexibility, scalability and low TCO at the access layer of medium- and large-enterprise campus networks. The 5130 supports stacking, fixed 10GbE ports, static layer 3 routing and RIP v1/v2, PoE+, ACLs, IPv6 and power savings with Energy Efficient Ethernet.
- Intelligent Resilient Fabric (IRF) virtualizes up to nine physical switches into one logical device for simpler, flatter, more agile networks.
- Four fixed 10GbE uplinks (SFP+ and 10GBASE-T) deliver performance for bandwidth intensive applications.
- Includes Software-defined Network (SDN) capabilities with OpenFlow 1.3 support for future proofing your network.
- Limited Lifetime Warranty and no software licensing required.

Improved Quality of Service with Traffic Management
- The HPE 5130 EI Switch Series supports advanced classifier-based QoS which groups traffic using multiple match criteria based on Layer 2 and 3 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or entire switch.
- Provides traffic prioritization with supported congestion actions include: strict priority (SP) queuing, weighted round robin (WRR), weighted random early detection (WRED), and SP+WRR and traffic policing with Committed Access Rate (CAR) and line rate.
- Reduce unwanted network traffic with broadcast control allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic.

Comprehensive Security Control
- The HPE 5130 EI Switch Series supports flexible authentication methods including 802.1X and MAC Authentication for greater security and policy-driven application authentication. Per-user access control lists (ACLs) provide identity-driven security and access control.
- ACLs provide IP Layer 2 to Layer 4 traffic filtering; supports global ACL, VLAN ACL, port ACL, and IPv6 ACL.
- Security with encryption of access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3, and other features including DHCP protection, IP source guard, dynamic ARP protection and RADIUS/HWTACAS.

Single View of the Network
- The HPE 5130 EI Switch Series can be seamlessly managed with HPE Intelligent Management Center (IMC) to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management.
- RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.


Business IT purchase over £1000? Spread the cost on a monthly basis with our flexible leasing options.

Technical Information

Full duplex
Y
MAC address table
16384 entries
Switching capacity
176 Gbit/s
Jumbo frames support
Y
10G support
Y
Packet buffer memory
3 MB
Latency (10 Gbps)
1.5 µs
Throughput
130.9 Mpps
Rack mounting
Y
Form factor
1U
Colour of product
Grey
Stackable
Y
Power consumption (typical)
70 W
Power over Ethernet (PoE) Support
Y
AC input frequency
50 - 60 Hz
AC input voltage
100 - 240 V
Switch layer
L3
Quality of Service (QoS) support
Y
Web-based management
Y
Switch type
Managed
Internal memory
1024 MB
Flash memory
512 MB
Memory type
SDRAM
Packet buffer memory
3 MB
Full duplex
Y
MAC address table
16384 entries
Networking standards
IEEE 802.3,IEEE 802.3ab,IEEE 802.3u
Flow control support
Y
Jumbo Frames support
Y
IP routing
Y
Auto MDI/MDI-X
Y
VLAN support
Y
10G support
Y
Copper ethernet cabling technology
10BASE-T,100BASE-TX,1000BASE-T
Auto-sensing
Y
Operating relative humidity range
10 - 90%
Storage temperature range (T-T)
-40 - 70 °C
Operating temperature range (T-T)
-5 - 45 °C
Storage relative humidity range
5 - 95%
Internal memory
1024 MB
Flash memory
512 MB
Memory type
SDRAM
Stackable
Y
Packet buffer memory
3 MB
Physical stacking (units)
9
Console port
RJ-45
Copper ethernet cabling technology
10BASE-T,100BASE-TX,1000BASE-T
SFP+ ports quantity
2
Basic switching RJ-45 Ethernet ports type
Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity
48
Power over Ethernet (PoE) support
Y
Total Power over Ethernet (PoE) budget
370 W
Access Control List (ACL)
Y
DHCP features
DHCP server,DHCP client
Rack mounting
Y
Form factor
1U
Colour of product
Grey
Stackable
Y
VLAN support
Y
VLAN support
Y
Weight
7 kg
Height
43.7 mm
Width
440 mm
Depth
420 mm

Customers Also Viewed:

#