Ubiquiti PBE-5AC-Gen2 PowerBeam AC Gen2 High-Perforrmance airMAX ac Bridge

High-Performance airMAX ac Bridge
Incorporating a dish reflector design with proprietary airMAX ac technology, the PowerBeam® AC is ideal for CPE deployments requiring maximum performance.

Management Wi-Fi Radio
The PowerBeam AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.

Improved Mounting and Surge Protection
Featuring enhanced protection against ESD events, the PowerBeam AC offers a more robust mount with a convenient lifting loop or handle.

Integrated Radio Design
Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance because it eliminates cable losses.

Plug and Play Installation
The PowerBeam AC requires no tools for assembly; only a single wrench is required for pole-mounting.

Performance Breakthrough
airMAX ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance.

Superior Processing
Ubiquiti's airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.

Incredible Antenna Beam Performance
The form factor of the PowerBeam AC features the highest gain for its size. The PowerBeam AC's excellent beam directivity provides the best performance in high-noise environments.

Now with airOS 8
airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.

Specifications

Dimensions
420 x 420 x 230mm

Weight
2.22 kg

Power Supply
24V, 0.5A Gigabit PoE Adapter (Included)

Max Power Consumption
8.5W

Power Method
Passive PoE (Pairs 4, 5+; 7, 8 Return)

Supported Voltage Range
20 to 26VDC

Gain
25 dBi

Networking Interface
(1) 10/100/1000 Ethernet Port

Mounting
Pole-Mounting Kit (Included)

Wind Loading
380 N @ 200 km/h (85.4 lbf @ 125 mph)

Wind Survivability
200 km/h (125 mph)

ESD/EMP Protection Air
+- 24 kV, Contact +- 24 kV

Operating Temperature
-40 to 70C (-40 to 158F)

Operating Humidity
5 to 95% Non-condensing

RoHS Compliance
Yes

Certifications
CE, FCC, IC

Box Contents
Dish Reflector
Antenna Feed
Rear Housing
Mounting Bracket
Hex Bolts with Washers (Qty. 4)
Pole Clamp Carriage Bolts (Qty. 2)
Flange Nuts (Qty. 2)
Gigabit PoE (24V, 0.5A) with Mounting Bracke
Power Cord