Call us on 03333 11 00 66
VISION VFM-D LCD Desk Arm 100x100 Dual
Manufacturer Part Code: VFM-DAD2
Order Code: BRVIS-VFMDAD2
Category: Monitor Desk Mounts & Brackets
VISION FLAT PANEL MONITOR DESK ARM FOR DUAL LCD MONITORS WHICH USE VESA 100 FIXING HOLES - Desk mount bracket which fits flat panel displays up to 32 with VESA patterns of 100 x 100 (used on most desktop monitors). Powercoated Silver Aluminium. Double-art
The Vision Flat-Panel Mount – Desk range is tough and flexible. The VFM-DAD2 (desk arm dual) accommodates two flat-panel LCD or LED screens which have 100 x 100mm rear mounting holes – in other words almost all computer monitors.
SWL 18 kg
The VFM-DAD2 can support monitors up to 18 kg (39.7 lb).
Up to 30?
If a larger displays have the correct mounting points and weighs less than the SWL this mount can support it safely.
To allow for different loads the dampers can be tightened or loosened to make sure the display stays where it is when you let go of it.
Clip on covers allow tidy cable routing.
Clamp or Fix
The VF-DAD2 can be clamped or a fixing adaptor is included to bolt it to the table (requires drilling hole in table).
Freedom of Movement
Almost endless tilt, rotation, swivel, and height adjustment puts the display right where you need it.
Move each display up and down independently to get the right ergonomic setup.
The centres of the displays can be up to 1130 mm (44.5?) apart. The maximum height from the desk top to the centre of the screens is 390 mm (15.4?).