Seen this cheaper elsewhere?
Call us on 03333 11 00 66
 
All NAS Devices | QNAP TS-H1886XU-RP-R2 18 Bay Rackmount Diskless NAS Enclosure with 32GB RAM | TS-H1886XU-RP-R2-D16 | ServersPlus
QNAP TS-H1886XU-RP-R2-D16 | serversplus.com

Illustration purposes only

QNAP TS-H1886XU-RP-R2 18 Bay Rackmount Diskless NAS Enclosure with 32GB RAM

QNAP Logo here

Manufacturer Part Code: TS-H1886XU-RP-R2-D16

Order Code: NSQNA-TSH1886XU3

Category: All NAS Devices

QNAP TS-h1886XU-RP-R2-D1622-32G 18 Bay

Cost-effective 10GbE-ready ZFS storage for virtualization and data-intensive enterprise applications

Intel® Xeon® D processor and up to 128 GB DDR4 ECC memory. Powerful and reliable
The TS-h1886XU-RP R2 features an Intel® Xeon® D-1622 quad-core processor, 32 GB DDR4 ECC memory (dual-channel module, four Long-DIMM slots, upgradable to 128 GB), and dual redundant power supplies to deliver a cost-efficient NAS solution with server-grade performance and the utmost reliability. By connecting multiple QNAP expansion enclosures, the storage capacity of the TS-h1886XU-RP R2 can be easily expanded to satisfy fast-growing data and budget flexibility.

ECC memory forestalls data corruption to assure reliability
The TS-h1886XU-RP R2 uses ECC memory that can detect and correct single-bit memory errors as they occur to prevent downtime and data loss, which is essential for always-on, mission-critical, server-grade applications. The TS-h1886XU-RP R2 supports dual-channel DDR4 memory in four Long-DIMM slots. When using paired memory modules, the TS-h1886XU-RP R2 can leverage the power of dual-channel architecture to boost performance. You can also customize the memory configuration (supports up to 128 GB RAM) of the TS-h1886XU-RP R2 for greater performance to tackle dynamically-changing workloads, such as virtualization.

Dual 10GbE connectivity optimizes high-speed data transfer and supports RDMA/RoCE
The TS-h1886XU-RP R2 comes with a pre-installed dual-port 10GbE SFP+ Smart NIC (that uses the NVIDIA® Mellanox ConnectX®-4 Lx, or the same level SmartNIC) to improve bandwidth-demanding data center and virtualization applications and to support RDMA over Converged Ethernet (RoCE and RoCEv2), allowing data to bypass general network drivers, the socket layer, and directly enter ESXi server and storage memory buffer. RoCE technology can improve NAS performance while lowering CPU consumption of applications that use an Ethernet network, ideal for low-latency and high-speed large data transfer.

Four 2.5GbE ports to redefine upgraded connectivity
Compared with the previous model, the data transmission speed of TS-h1886XU-RP R2 is increased by 250% to handle multiple key business tasks.

HDD + SSD hybrid structure to optimize storage performance and utilization
The TS-h1886XU-RP R2 features outstanding hardware and expandable architecture, enabling optimum performance and flexibility to satisfy business needs in various applications.

Abundant I/O capability with PCIe expansion
The TS-h1886XU-RP R2 has two PCIe Gen3 x4 slots (one slot pre-installed with a dual-port 10GbE expansion card) and one PCIe Gen2 x4 slot that allow for installing various expansion cards to expand application potential.

Build an affordable Fibre Channel SAN environment
Common Fibre Channel Storage Area Networks (SAN) devices are often costly. By installing QNAP dual-port ###TS-h1886XU-RP R2-fc### Fibre Channel expansion cards in the TS-h1886XU-RP R2, you have more budget-friendly options to add a NAS to a SAN environment. You can set a Fibre Channel Target using the iSCSI & Fibre Channel app. Moreover, the LUN Masking and Port Binding features provide an additional layer of data security.

Build an affordable Fibre Channel SAN environment
Common Fibre Channel Storage Area Networks (SAN) devices are often costly. By installing QNAP dual-port ###TS-h1886XU-RP R2-fc### Fibre Channel expansion cards in the TS-h1886XU-RP R2, you have more budget-friendly options to add a NAS to a SAN environment. You can set a Fibre Channel Target using the iSCSI & Fibre Channel app. Moreover, the LUN Masking and Port Binding features provide an additional layer of data security.

Data integrity is key
QuTS hero's self-healing ensures data integrity and reliability. Write Once, Read Many (WORM) is also supported.

Data reduction improves storage efficiency and performance
Inline data deduplication, compression, and compaction reduce file sizes to conserve storage capacity and optimize performance.

Multi-level cache technology
Main memory read cache (L1 ARC), SSD second-level read cache (L2 ARC), and ZFS Intent Log (ZIL) for synchronous transactions with power failure protection are supported to boost performance and security.

RAID Z enables robust data protection
Multiple RAID levels allow flexible capacity utilization. RAID Triple Parity and Triple Mirror deliver higher levels of data protection.

QSAL (QNAP SSD Antiwear Leveling) enhances data protection
RAID-level SSD lifespan is automatically and regularly detected to prevent simultaneous SSD failure, improving your data protection and system reliability.

App Center ecosystem extends NAS functionality
Apps for backup/sync, virtual machines/containers, content management, productivity, and more features can be used to expand the application potential of the NAS.

Tiered storage configuration for a QuTS hero NAS
Basic requirements for setup are similar to QTS. We recommend you to follow these steps to acquire optimal storage efficiency and performance for QuTS hero.

Inline data deduplication, compression, and compaction drives Big Data storage efficiency
QuTS hero supports advanced block-based data reduction technologies (including inline data deduplication, compression, and compaction) to reduce file sizes, conserve storage capacity, and optimize performance. For example, if 20 virtual machines on a NAS are replicated using the same template, then storage space requirements for all 20 virtual machines can be reduced by up to 95%. Whether acting as primary or backup storage, the TS-h1886XU-RP R2 optimizes storage utilization to provide a reliable storage cornerstone in the Big Data era.

Real-time SnapSync ensures minimal RPO with real-time disaster recovery
Real-time SnapSync ensures that both the primary and secondary NAS maintain identical data. When data is written to the s


Business IT purchase over £1000? Spread the cost on a monthly basis with our flexible leasing options.

Technical Information

Chassis type
Rack (3U)
LED indicators
HDD, LAN, SSD, Status
Product colour
Black, Grey
Chassis type
FAT32, HFS+, NTFS, ZFS, exFAT, ext3, ext4
Number of fans
3 fan(s)
Cooling type
Active
Fan diameter
6 cm
Power consumption (typical)
117.92 W
Number of power supply units
2
Redundant power supply (RPS) support
Y
AC input voltage
100 - 240 V
Power supply location
Built-in
Fan voltage
12 V
Power supply unit (PSU) capacity
550 W
Harmonized System (HS) code
84714100
Internal memory type
DDR4
Flash memory
5000 MB
Memory slots
4
ECC
Y
Memory form factor
UDIMM
Maximum RAM supported
128 GB
Internal memory
32 GB
Supported network protocols
IPv4, IPv6, SSH, Telnet, HTTP(S), FTP, CIFS/SMB, AFP
Ethernet LAN
Y
Wake-on-LAN ready
Y
Jumbo frames support
Y
DHCP server
Y
Ethernet LAN data rates
100,1000,2500 Mbit/s
iSCSI support
Y
Dynamic DNS (DDNS)
Y
Operating relative humidity (H-H)
5 - 95%
Storage temperature (T-T)
-20 - 70 °C
Operating temperature (T-T)
0 - 40 °C
Storage relative humidity (H-H)
5 - 95%
Cables included
AC, LAN (RJ-45)
Quick installation guide
Y
Number of screws
112
Power cables quantity
2
Type
NAS
Security algorithms
256-bit AES, FIPS 140-2, SNMPv2, SNMPv3
Browser supported
Mozilla Firefox, Microsoft Edge, Google Chrome, Apple Safari
Buzzer
Y
Snapshot
Y
Web-based management
Y
Access Control List (ACL)
Y
Reset button
Y
Multilingual support
Y
On/off switch
Y
S.M.A.R.T. support
Y
Device class
Large Enterprise Business
Backup function
Y
Backup features
Cloud, iSCSI LUN
Built-in FTP server
Y
System log
Y
Hot spare
Y
Ethernet LAN (RJ-45) ports
4
Concurrent connections
10000
Fiber ports quantity
2
Fiber optic connector
SFP+
PCI Express x8 (Gen 3.x) slots
1
PCI Express x4 (Gen 3.x) slots
1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity
2
USB port
Y
Processor model
D-1622
Processor manufacturer
Intel
Processor family
Intel® Xeon® D
Processor cores
4
Processor boost frequency
3.2 GHz
Processor cache
6 MB
CPU configuration (max)
1
Processor frequency
2.6 GHz
Enhanced Intel SpeedStep Technology
Y
Execute Disable Bit
Y
Idle States
Y
Intel Trusted Execution Technology
Y
Intel VT-x with Extended Page Tables (EPT)
Y
Embedded options available
N
Intel TSX-NI
Y
Intel 64
Y
Intel QuickAssist Technology
N
Intel Virtualization Technology for Directed I/O (VT-d)
Y
Intel Virtualization Technology (VT-x)
Y
Operating system installed
QuTS hero
Operating system version
h5.0.0
Windows operating systems supported
Windows 10, Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 IOT Core, Windows 10 Pro, Windows 10 Pro x64, Windows 10 x64, Windows 11, Windows 11 x64, Windows 7, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 7 x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64
Mac operating systems supported
Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina, Mac OS X 10.15.3 Catalina, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks, Mac OS X 11.0 Big Sur
Linux operating systems supported
CentOS 7.0, SuSE Linux 12.0, SuSE Linux 12.3, SuSE Linux 15, Ubuntu 14.04, Ubuntu 14.10, Ubuntu 15.04, Ubuntu 15.10, Ubuntu 16.04, Ubuntu 16.10, Ubuntu 17.10, Ubuntu 18.04 LTS, Ubuntu 20.04 LTS
Server operating systems supported
Windows Server 2003, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Other operating systems supported
IBM AIX 7.1, IBM AIX 7.2, Solaris 10, Solaris 11
RAID levels
0, 1, 5, 6, 10, 50, 60, JBOD
Supported file systems
FAT32, HFS+, NTFS, ZFS, exFAT, ext3, ext4
RAID support
Y
Number of storage drives supported
18
Storage drive sizes supported
2.5,3.5"
Storage drives installed
N
Installed storage drive type
N
Supported storage drive types
HDD & SSD
Hot-swap drive bays
Y
Supported storage drive interfaces
Serial ATA II, Serial ATA III
Online RAID expansion
Y
Disk roaming
Y
RAID rebuild
Y
Chassis type
FAT32, HFS+, NTFS, ZFS, exFAT, ext3, ext4
Harmonized System (HS) code
84714100
Weight
12.7 kg
Package weight
18.7 kg
Height
88.3 mm
Width
482 mm
Depth
549.7 mm

Customers Also Viewed:

#