Seen this cheaper elsewhere?
Call us on 03333 11 00 66
 
APC Tower UPS | APC Back-UPS 650VA - BE650G2-UK | BE650G2-UK | ServersPlus
APC BE650G2-UK | serversplus.comAPC BE650G2-UK | serversplus.comAPC BE650G2-UK | serversplus.com

Illustration purposes only

APC Back-UPS 650VA - BE650G2-UK

APC Logo here

Manufacturer Part Code: BE650G2-UK

Order Code: PSAPC-BE650G2UK

Category: APC Tower UPS

Back-UPS 650VA 230V 1 USB Charging Port

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery charging indicator
Lets you know when your battery is charging and when it is fully charged.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.

Cold-start capable
Provides temporary battery power when the utility power is out.

Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Simple battery replacement
Increases UPS availability by allowing quick, easy battery replacement.

USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)


Business IT purchase over £1000? Spread the cost on a monthly basis with our flexible leasing options.

Technical Information

Battery recharge time
16 h
Hot-swap battery
Yes
Cold start
Yes
Automatic battery test
Yes
Battery life (max)
5 year(s)
Certification
CE, EAC
Form factor
Compact
Cable length
1.83 m
LED indicators
Yes
Product colour
Black
Audible alarm(s)
Yes
Output power capacity
0.65 kVA
Surge energy rating
310 J
Noise level
45 dB
Input frequency
47/63 Hz
Maximum current
6 A
Efficiency
80%
Output power
400 W
Surge protection
Yes
Surge protection features
Digital Subscriber Line (DSL)
Input operation voltage (max)
266 V
Input operation voltage (min)
180 V
Output operation voltage (min)
220 V
Output operation voltage (max)
230 V
Output frequency
47/63 Hz
Waveform
Sine
UPS topology
Standby (Offline)
Audible alarm modes
Alarm when on battery, Low battery alarm, Overload alarm
Harmonized System (HS) code
85078000
Operating relative humidity (H-H)
0 - 90%
Storage temperature (T-T)
-15 - 45 °C
Operating temperature (T-T)
0 - 40 °C
Storage relative humidity (H-H)
0 - 95%
Non-operating altitude
0 - 4500 m
Package weight
4.5 kg
Package depth
441 mm
Package height
190 mm
Package width
186 mm
USB port
Yes
Harmonized System (HS) code
85078000
Sustainability certificates
RoHS
Compliance certificates
RoHS
Weight
4 kg
Package weight
4.5 kg
Height
120 mm
Width
130 mm
Depth
365 mm
Package depth
441 mm
Package height
190 mm
Package width
186 mm

Customers Also Viewed:

#