Seen this cheaper elsewhere?
Call us on 03333 11 00 66
 
APC Tower UPS | APC Smart-UPS SRT 1000VA 230V | SRT1000XLI | ServersPlus
APC SRT1000XLI | serversplus.com

Illustration purposes only

APC Smart-UPS SRT 1000VA 230V

APC Logo here

Manufacturer Part Code: SRT1000XLI

Order Code: PSAPC-SRT1000XLI

Category: APC Tower UPS

APC Smart-UPS SRT 1000VA - UPS (rack-mountable / external) - AC 230 V - 1000 Watt - 1000 VA - RS-232 USB - output connectors: 6 - PFC - black

High density, double-conversion on-line power protection with scalable runtime
Includes: CD with software, Comms cable, Documentation CD, Installation guide, Removable support feet, USB cable, Warranty card

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.

Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Scalable runtime
Allows additional run time to be quickly added as needed.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

LED status indicators
Quickly understand unit and power status with visual indicators.

Serial connectivity
Provides management of the UPS via a serial port.

InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.

SmartSlot
Customize UPS capabilities with management cards.

Network manageable
Provides remote power management of the UPS over the network.

Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.

Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.

Cold-start capable
Provides temporary battery power when the utility power is out.

Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.

Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)


Business IT purchase over £1000? Spread the cost on a monthly basis with our flexible leasing options.

Technical Information

Battery technology
Sealed Lead Acid (VRLA)
Battery recharge time
3 h
Typical backup time at half load
21 min
Typical backup time at full load
8 min
Hot-swap battery
Y
Battery voltage
48 V
Cold start
Y
Automatic battery test
Y
Battery life (max)
5 year(s)
Display
LCD
Certification
CE, EAC
Form factor
Rackmount/Tower
Cable length
1.8 m
LED indicators
Y
Product colour
Black
Rack capacity
2U
Cooling type
Active
International Protection (IP) code
IP20
Display type
LCD
Built-in fan
Y
Audible alarm(s)
Y
Emergency Power Off (EPO)
Y
Output power capacity
1 kVA
Surge energy rating
432 J
Noise level
50 dB
Input frequency
40/70 Hz
Output power
1000 W
Output voltage Total Harmonic Distortion (THD)
2%
Crest factor
3:1
Input operation voltage (max)
240 V
Input operation voltage (min)
220 V
Output operation voltage (min)
50 V
Output operation voltage (max)
240 V
Output frequency
50/60 Hz
ECO mode
Y
Waveform
Sine
Auto-restart
Y
UPS topology
Double-conversion (Online)
Audible alarm modes
Alarm when on battery, Battery replacement
Operating altitude
0 - 3048 m
Operating relative humidity (H-H)
0 - 95%
Storage temperature (T-T)
-20 - 50 °C
Operating temperature (T-T)
0 - 40 °C
Non-operating altitude
0 - 15240 m
Nominal output voltage
230 V
Nominal input voltage
230 V
Cables included
USB cable
Quick installation guide
Y
Serial interface type
RJ-45
Serial ports quantity
1
AC outlets quantity
12 AC outlet(s)
Power plug
C14 coupler
AC outlet types
C13 coupler
Serial interface
Y
USB port
Y
SmartSlot
Y
Sustainability compliance
Y
Sustainability certificates
CE
Weight
20.5 kg
Height
85 mm
Width
432 mm
Depth
505 mm
Battery weight
29.6 kg
Battery width
59.4 cm
Battery depth
74.9 cm
Battery height
24.6 cm

Customers Also Viewed:

#