Seen this cheaper elsewhere?
Call us on 03333 11 00 66
 
APC Rack UPS | APC SMART-UPS 3000VA LCD RM 2U 230V WITH SMARTCONN | SMT3000RMI2UC | ServersPlus
L R
APC SMT3000RMI2UC | serversplus.comAPC SMT3000RMI2UC | serversplus.comAPC SMT3000RMI2UC | serversplus.comAPC SMT3000RMI2UC | serversplus.comAPC SMT3000RMI2UC | serversplus.comAPC SMT3000RMI2UC | serversplus.comAPC SMT3000RMI2UC | serversplus.comAPC SMT3000RMI2UC | serversplus.com

Illustration purposes only

APC SMART-UPS 3000VA LCD RM 2U 230V WITH SMARTCONN

APC Logo here

Manufacturer Part Code: SMT3000RMI2UC

Order Code: PSAPC-SMT3000RMC

Category: APC Rack UPS

Smart-UPS 3000VA RM 230V SmartConnect

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Cold-start capable
Provides temporary battery power when the utility power is out.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Energy meter
Provides actual kilowatt hours of usage for energy conscious users.

Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

High online efficiency
Reduces utility costs, generates less heat.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

LED Indicators
Provide easy-to-read status of the unit and utility power conditions.

Network manageable
Provides remote power management of the UPS over the network.

Outlet group control
Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).

Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.

Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Sequenced network shutdown and reboot
Customize network shutdown and reboot sequence of connected servers and UPSs.

Serial connectivity
Provides management of the UPS via a serial port.

Single switched outlet group
Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.

SmartConnect
Innovative, easy to use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services.

StruxureWare Data Center Expert compatible
Enables centralized management via StruxureWare Data Center Expert.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

USB connectivity
Provides management of the UPS via a USB port (not available on all models).

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Wide input voltage range
Designed for harsh electrical environments to save battery life.


Business IT purchase over £1000? Spread the cost on a monthly basis with our flexible leasing options.

Technical Information

Battery technology
Sealed Lead Acid (VRLA)
Battery recharge time
3 h
Typical backup time at half load
11.5 min
Typical backup time at full load
3.2 min
Hot-swap battery
Y
Cold start
Y
Automatic battery test
Y
Battery capacity
547 VAh
Battery life (max)
5 year(s)
Certification
CE, EAC, EN 60950, EN/IEC 62040-1, EN/IEC 62040-2, GS Mark, IRAM, RCM, VDE, WEEE, REACH, PEP, EOLI
RoHS compliance
Y
Colour of product
Black
Display
LCD
Certification
CE, EAC, EN 60950, EN/IEC 62040-1, EN/IEC 62040-2, GS Mark, IRAM, RCM, VDE, WEEE, REACH, PEP, EOLI
Form factor
Rackmount
Cable length
2 m
LED indicators
status
Colour of product
Black
Rack capacity
2U
RoHS compliance
Y
Display
LCD
Output power capacity (VA)
3000 VA
Surge energy rating
320 J
Input frequency
50/60 Hz
Efficiency
98.9%
Output power
2700 W
Input operation voltage (max)
302 V
Input operation voltage (min)
151 V
Output operation voltage (min)
220 V
Output operation voltage (max)
240 V
Audible alarm(s)
Y
Output power capacity
3000 VA
Surge energy rating
320 J
Noise level
55 dB
Input frequency
50/60 Hz
Efficiency
98.9%
Output power
2700 W
Input operation voltage (max)
302 V
Input operation voltage (min)
151 V
Output operation voltage (min)
220 V
Output operation voltage (max)
240 V
Waveform
Sine
Automatic Voltage Regulation (AVR)
Y
Auto-restart
Y
UPS topology
Line-Interactive
Hold time (min)
4 ms
Hold time (max)
8 ms
LED indicators
status
Audible alarms
Y
Bundled software
Powershute Business Edition
Operating altitude
0 - 3000 m
Operating relative humidity range
0 - 95%
Storage temperature range (T-T)
-15 - 45 °C
Operating temperature range (T-T)
0 - 40 °C
Storage relative humidity range
0 - 95%
Non-operating altitude
0 - 15000 m
Nominal output voltage
230 V
Nominal input voltage
230 V
Bundled software
Powershute Business Edition
Cables included
RS-232,USB cable
Quick installation guide
Y
Software CD
Y
Rack mount kit
Y
Bundled software
Powershute Business Edition
Package weight
51.7 kg
Cables included
RS-232,USB cable
Package depth
980 mm
Package height
254 mm
Package width
600 mm
Quick installation guide
Y
Software CD
Y
Rack mount kit
Y
LED indicators
status
Audible alarms
Y
Noise level
55 dB
Waveform
Sine
Automatic Voltage Regulation (AVR)
Y
Auto-restart
Y
UPS topology
Line-Interactive
Hold time (min)
4 ms
Hold time (max)
8 ms
Serial interface type
RJ-45
Cable length
2 m
AC outlets quantity
9 AC outlet(s)
Number of output IEC jumpers
3
Power plug
C20 coupler
AC outlet types
C13 coupler,C19 coupler
Serial interface
Y
USB port
Y
SmartSlot
Y
Noise level
55 dB
Form factor
Rackmount
Weight
44.3 kg
Package weight
51.7 kg
Height
86 mm
Width
480 mm
Depth
683 mm
Packaging depth
980 mm
Packaging height
254 mm
Packaging width
600 mm

Customers Also Viewed:

#